Seaflo 32V Dual Circuit ON/OFF Battery Disconnect Switch

Features

• Switches an isolated battery bank to all loads or combines battery banks to all loads
• Tin-plated copper studs for maximum conductivity and corrosion resistance
• Studs accept 3/8″ (M10) ring terminals
• One-piece terminal stud design never loosens over time
• Isolating cover with three snap-off side pieces protects rear contacts and allows wire access in any direction

Specifications

• Cranking Rating: 30 sec.
  
• Intermittent Rating: 5 min.
  
• Continuous Rating: DC Terminal Stud, Tin-Plated Copper
  
• Torque 120 in-lb (13.56 N-m) Cable Size to Meet Ratings” Maximum Voltage Rating
• Ignition Protected

Regulatory

• CE, RoHS, ISO 8846
• Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
• Meets UL 1500 and SAE J1171 external ignition protection requirements
• IP66 — protected against powerful water jets

Caution

• Disconnect positive battery terminal before installing.
• Consult electrical professional for proper wiring application.

Installation

• Refer to the latest edition of NFPA 302 and/or ABYC E11 Standard for installation information.
• Attach one 4/0 AWG cable per terminal to meet ratings.
• Battery cable terminals must be attached under nut and lock washer. Torque 120 in-lb (13.56 N-m).

Operation

• Turn all appliances off before turning the battery switch to OFF.
• Do not switch to OFF while engine is running.

Battery Switch Dimensions