Load image into Gallery viewer, Car Builders Spray Adhesive Can 500mm
Load image into Gallery viewer, Car Builders Spray Adhesive Can 500mm
Load image into Gallery viewer, Car Builders Spray Adhesive Can 500mm
Load image into Gallery viewer, Car Builders Spray Adhesive Can 500mm

SKU: SA

Car Builders Spray Adhesive Can 500mm

Vendor car builders
Regular price $32.99
Sale price $32.99 Regular price
Sale Sold out
Unit price
/per 
Tax included.
This is a pre order item. We will ship it when it comes in stock.

Car Builders Upholstery Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. This Spray Adhesive is manufactured right here in Australia and has been tested and proven to perform at temperatures up to 120°C. These highly charged cans feature an easy to use adjustable nozzle which sprays out in a thick splatter type pattern. Not to be mistaken for fine mist contact adhesive, this is an industrial grade glue that will cover large surfaces.

Simply spray both surfaces, allow a short amount of time to tack, and bond the two materials together.

Great for:

  • Additional strength when using self-adhesive products
  • Installing finished carpet on floors, wheel arches, roofs and walls.
  • Permanent bond on plastics, metal, wood, glass, fabric, flexible foam and paper

Coverage:
7sqm per can. Note: both adhering surfaces must be coated, therefore allow 3.5sqm coverage per can.

Temperature range:

Effective bonding range between -16°C and 120°C

Clean up:
Clean overspray with Mineral Turpentine or Eucalyptus

This product is not designed to provide a permanent bond in areas that are exposed to direct sunlight or extreme temperatures. This product is not suitable for plasticised vinyl or polystyrene.

Specifications:

7sqm coverage per can. Note: both adhering surfaces must be coated, therefore allow 3.5sqm coverage per can.

Application should be between 16°C - 27°C.

Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.

 

Black Friday - Price Match Guarantee: found a lower price? We'll match it.

Car Builders Upholstery Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. This Spray Adhesive is manufactured right here in Australia and has been tested and proven to perform at temperatures up to 120°C. These highly charged cans feature an easy to use adjustable nozzle which sprays out in a thick splatter type pattern. Not to be mistaken for fine mist contact adhesive, this is an industrial grade glue that will cover large surfaces.

Simply spray both surfaces, allow a short amount of time to tack, and bond the two materials together.

Great for:

  • Additional strength when using self-adhesive products
  • Installing finished carpet on floors, wheel arches, roofs and walls.
  • Permanent bond on plastics, metal, wood, glass, fabric, flexible foam and paper

Coverage:
7sqm per can. Note: both adhering surfaces must be coated, therefore allow 3.5sqm coverage per can.

Temperature range:

Effective bonding range between -16°C and 120°C

Clean up:
Clean overspray with Mineral Turpentine or Eucalyptus

This product is not designed to provide a permanent bond in areas that are exposed to direct sunlight or extreme temperatures. This product is not suitable for plasticised vinyl or polystyrene.

Specifications:

7sqm coverage per can. Note: both adhering surfaces must be coated, therefore allow 3.5sqm coverage per can.

Application should be between 16°C - 27°C.

Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.