Tax included.
Car Builders Peel & Stick Heat Shield pressure sensitive adhesive makes these heat shields easy and versatile to install, particularly in tight spaces. It is widely used as a thermal barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non-ferrous materials. Constructed from a needle punched fibreglass with a polyester core and durable aluminium face. The product has been oven tested for 30 hours with no failure at 475°F (246°C).
Pros - Direct apply to surface being protected, ideal for tight spaces. Can be applied to plastic surfaces e.g. fuel tanks
Features/Advantages
- Lightweight
- Easily formed into place
- Very effective in limited space
- Approved at several major OEMs
- Acoustical sound deadening benefits without the squeak or rattle issues of stampings
- Interior or exterior applications
- Easy installation - just peel off the release liner and adhere to surface.
Applications
- Fuel tank/system
- Tunnel shields
- Floor pans
- Exhaust systems
- Body shields
- Transmissions
- Steering components
- Fluid lines
- Rubber mounts
- Axle bushings
Technical Specifications
Material Type: Polyester & Fibreglass core material
Temperature: Withstands 246°C (475°F) oven test for 30 hours with no failure
Core Thickness: 3mm (0.125 inch)
Foil Thickness: 0.2mm (0.010”)
Weight: 915-1400 g/m² (3-4.5 oz/ft²)
Moisture Absorption: 0.3%
Thermal Conductivity (K-value): 24°C: 0.036 W/m/K
93°C: 0.043 W/m/K
Adhesion To E-Coated Steel: 22.1 N/cm after 24hr Dwell
Tensile Strength: 526 N/cm²
Tear Resistance: 333 N/cm