Car Builders Spray Adhesive Can 500mm

Car Builders Premium Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. Our Spray Adhesive is manufactured right here in Australia and has been tested and proven to perform at temperatures up to 120°C.

Car Builders Upholstery Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. Our Spray Adhesive is manufactured right here in Australia and has been tested and proven to perform at temperatures up to 120°C. These highly charged cans feature an easy to use adjustable nozzle which spray out in a thick splatter type pattern. Not to be mistaken for fine mist contact adhesive this is an Industrial grade glue that will cover large surfaces.

Simply spray both surfaces allow a short amount of time to tack and bond the two materials together.

Great for:

• Additional strength when using self-adhesive products
• Installing finished carpet on floors, wheels arches, roofs and walls.
• Permanent bond on plastics. metal, wood, glass, fabric, flexible foam and paper

Coverage:
7 sq/m per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.

Teperature range:

Effective bonding range between - 16°C and 120°C

Clean up:
Clean overspray with Mineral Turpentine or Eucalyptus

This product is not designed to provide a permanent bond in areas that are exposed to direct sunlight or extreme temperatures. This product is not suitable for plasticised vinyl or polystyrene.

Specifications:

7sq/m coverage per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.

Application should be between 16°C - 27°C.

Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the
surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.

This product is not designed to provide a permanent bond in areas that are exposed to direct sunlight or extreme temperatures. This product is not suitable for plasticised vinyl or polystyrene.